Pre-Installation; Planning Installation; Tools Required - Glacier bay F1AA0005BNV Guía De Uso Y Cuidado

Pre-Installation

PLANNING INSTALLATION

Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service
for replacement parts.
All installations can vary depending on how your previous faucet was installed. Not all supplies for faucet
installation are included; however, they are available wherever plumbing supplies are sold. When choosing your
installation supplies, make sure they are IAPMO and/or CSA approved products.

TOOLS REQUIRED

If you are replacing your plumbing valve, please review the four common plumbing methods illustrated below:
CPVC, PEX, IPS, and Copper. Remove the existing handle and valve trim before replacing your valve. Please follow
all local building and plumbing codes.
A. CPVC
Safety Measuring CPVC Tubing
Phillips Crescent
Glasses Tape Cement Cutter
Screwdriver Wrench
Pipe Joint
Thread Key SharkBite
Thermometer Flashlight
Compound
Seal Tape Hole Saw fittings
CPVC
Cleaner
3
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.