Chicco SPRINT Instrucciones De Uso página 17

CLEANING AND MAINTENANCE
The cleaning and maintenance of this product must be carried out on a regular
CLEANING
Fabric Cover").
Do not bleach
Do not iron
metal parts to prevent the formation of rust if the stroller has come into
MAINTENANCE
operation of the stroller, ensure that all the movable plastic parts placed along
GENERAL INSTRUCTIONS
WHEELS ASSEMBLY
HOW TO OPEN THE STROLLER
are at a safe distance. Ensure that during these operations the movable parts
3. Pull the trigger opening mechanisms, located on the handles of the stroller, at the
BACKREST ASSEMBLY
COMPONENTS
A) Backrest tube
B) Connection of backrest tube
C) Front release button
E) Rear release button
6. To assemble the backrest, insert both backrest tubes (A) in the corresponding
BACKREST FITTING
8. Fit the cover on the stroller's backrest from the top (fig. 8).
side of the backrest cover (fig. 9).
10. Thread the crotch strap leg divider through the slot located on the backrest
cover (fig. 10).
the backrest cover (fig. 11).
bottom of the seat (fig. 12).
as indicated in fig. 14.
CARRY-ALL BASKET
2 plastic hooks (H) to the pins on the front of the structure. Next, insert the 2
the press buttons, to the rear tubes of the stroller (K).
content inside the basket before folding the stroller.
CANOPY
fixing on the stroller's structure (fig. 16).
of the stroller. Check the proper locking of them on both sides.
REMOVABLE BUMPER BAR
is NOT a child restraint device.
HOW TO USE THE SAFETY HARNESS
21. After sitting the child in the stroller, insert the 2 prongs into the buckle and,
time (diag. 22).
underside of the seat).
HOW TO ADJUST THE BACKREST
backrest. Release the button to lock the backrest in the nearest position. To
ADJUSTING THE LEG REST
DOUBLE-TWIST ADJUSTABLE ERGONOMIC HANDGRIP
the desired position, adapting it to the height and most comfortable position
17