Suntec Wellness Klimatronic Heat Ray Carbon 3000 outdoor Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
objects.
• Never immerse the appliance, it's cord and plug into
water or other liquids.
Warning:
cover the heater!
Installation
1.
There are 4 brackets and fasteners inside the packaging which are to be used for the installation. Furthermore, in the
canal of back side of the appliance there are 4 square fastener washers 25×25mm. Take the square washers and fasten
2 brackets to the canal on the backside of the heater using the screws.
2. Fasten the brackets at the appropriate distance of each other (45-55cm).
Two other brackets are to be fastened using the fasteners at the appropriate distance on the wall parallel to the
floor (At least 1.8 m from the floor and at least 0.5 m from the ceiling).
4.
Join the brackets on the appliance with the brackets, fastened on the wall, with the help of figured screw-nuts. Install
the heater under necessary angle (in the direction to the area being heated).
Install the appliance strict in horizontal position only.
Safety Distances: Minimum distances required for safety
Minimum distances from wall corners: 40cm
Right and wrong positions
Direct your appliance towards the most appropriate angle.
Do face the unit to the window, glasses etc. as the heater primarily heats the locations onto which its light falls. Prevent the
loss of directed heat through the windows.
Operating
Step 1: Plug the power cord into the outlet.
Step 2: Click rocker switch to ▬ position and press Open/Close once, the digital screen shows P.0 which means power on.
Step 3: Press Open/Close twice, the digital screen shows P.1 which means first power setting.
Step 4: Press Open/Close 3 times, the digital screen shows P.2 which means second power setting.
Step 5: Press Open/Close 4 times, the digital screen shows P.3 which means second power setting.
Step 6: After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 indicates
timing one hour, 02 indicates timing two hours, etc.
Remote control
Definition of the buttons on the remote control
The functions of the appliance may be controlled via the buttons on your remote control and LCD screen. You may also
control some of the functions of your heater through the
1000W: First heating level. After turning on the appliance, you can choose low heating level.
2000W: Second heating level. After turning on the appliance, you can choose moderate heating level.
3000W: Third heating level. After turn on the appliance, you can choose high heating level.
Timer. After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 means one hour,
02 means two hours, etc
W arning! Please insert the batteries in your remote control.
In order to avoid overheating, do not
Minimum distances from coverage area and other objects: 100cm
buttons on the front side of the heater.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido