Overmax X-Wave Manual Del Usuario página 17

10. Toe-in adjustment
11. Wheel turn adjustment
5. How to assemble batteries in controller (see fig. 5):
•
Remove battery cover (1).
•
Insert 3 AA alkaline batteries. Pay special attention to battery polarity.
•
Put the cover back on (1).
6. How to charge batteries (see fig. 6):
Charge the battery before use.
1.
Disconnect the battery from the car before charging.
2. Connect the battery plug to USB cable. Connect the USB cable to the po-
wer adapter.
3. After about 150 minutes charging will be completed.
4. Disconnect the battery and put it in the car.
7. How to install battery in car (see fig. 7):
1.
Remove the bodywork.
2. Turn the hooks outside.
3. Open the battery cover.
4. Remove the cover and connect the battery plug to car plug.
5. Insert the connected battery, put and secure the battery cover with hooks.
To deinstall the battery, take these steps in a reversed order.
8. How to control (see fig. 8):
•
Turn the knob left or right to move front wheels.
•
Press the controller throttling valve to drive forward. The farther you move
the throttling valve, the faster the car drives. Slide the throttling value
forward to brake, and then to reverse.
EN