AmazonBasics B01BGY010C Manual De Instrucciones página 11

Operation
Setting the Master Code
Should you forget your password, the safe can still be accessed with the master code.
1. With the door open, press 0 key twice and then press the Reset button
2. Input the new code (3-8 digits), then press # key to confirm.
The icon turns on. The master code is set.
NOTE: If the
above until successful.
GY010C-AmazonBasics-IM-V03 (Multi).indb 11
icon doesn't turn on, the safe failed to set the new master code. Repeat the steps
.
11
9/8/16 3:49