For closing operation you must press continually the Alternative
button or the Emitter. If you do not press the button the door
stops.
OFF
Funcionamiento normal.
OPTION 2 - Hopping Code / Code Fixed
ON
Hopping code.
OFF
Code Fixed.
TECHNICAL CHARACTERISTICS
Alimentation
220V AC +/- 10%
Motor power
0.45HP
Normal Functioning time
127 seconds
Code Combinations
72.000 Billon codes
Number of Codes
31 Codes
Code Programming
Self - taught
Selection of function
Memorize function code
Frequency
433,92MHz
Homologations
Conforms to ETS 300-220/ETS300-683
Sensitivity
Better than -100dBm
Distance
Max. 60 metres
Aerial
Incorporated
Temperature
0 to 70ºC
WARNING!!
AN ACCESSIBLE SWITCH, TO TURN OFF THE EQUIPMENT MUST BE INSTALLED FOR SYSTEMS THAT ARE ALWAYS CONNECTED. BEFORE INSTALLING MAKE SURE THE SUPPLY VOLTAGE
IS SWITCHED OFF.
Instruction Manual
( EUROSR2 )
ACCESSORIES
SAFETY
•
OPERATION
Includes compatible radio with dynamic code transmitters and Variocode. Protected inputs for operations. Protection of main feed and motor
with fuse 6A and Varistore. Power-ON led. Alternative button and Safety contact inputs.
You could start an operation with an emitter or with alternative button.
The operation Ends due to the follow conditions: activation of door limit switches or by the end of operation time.
Door limit switches DO NOT have connection into the control panel. The operation time is a security time and is fixed to 127 secs.
Vario emitter and the alternative button activate the same function. If the door is in an opening operation and we push the emitter or
alternative button the door stops, if we push another time the door starts a closing operation, if we push another time the door starts an