Leviton FLX Serie Manual De Instalación Y Guía Del Usuario página 10

Single Phase PDUs
The SELECT button allows you to determine the information (Amps, Volts, or Watts) to be
shown on the meter's display. Pressing the SELECT button will cycle through the available
options. The LED associated with your selection will light up on the display.
AMPS: When selected, displays the total Amperage for all devices connected to the PDU.
VOLTS: When selected, displays the total Voltage for all devices connected to the PDU.
WATTS: When selected, displays the total Wattage for all devices connected to the PDU.
WHEN THERE IS NO LOAD CONNECTED TO THE PDU THEN THE LED DISPLAY WILL
READ THE FOLLOWING:
AMPS: "0.0" will be displayed on the LED display.
VOLTS: "0.0" will be displayed on the LED display.
WATTS: "00" will be displayed on the LED display.
NOTE: To reboot the web server in a Monitored PDU press and hold the
SELECT button for 5 seconds. This will not erase the settings you have already
entered.
PK-93661-10-02-0C
10
© 2009 Leviton Manufacturing Co., Inc. All Rights Reserved.
Single Phase Meter Display
AMPS Amperage LED
VOLTS Voltage LED
WATTS
Wattage LED
SELECT
Select Button