Leviton FLX Serie Manual De Instalación Y Guía Del Usuario página 8

FLX PDU Meter Instructions
3-PHASE AND SINGLE PHASE PDUs
Connect FLX PDU to the appropriate power source. The PDU Meter will perform a self test
to confirm operation of all LEDs including the LED display.
Once the self test is completed the TOTAL LED and the AMPS LED will be illuminated.
The LED Display will read "_ _0.0" when no load is connected.
The meter display has a built in gravity sensor which automatically inverts the characters
shown on the display to match the orientation, depending on whether the input cord is
running up or down. If the orientation of the PDU is changed, the display will auto-invert
within a few seconds.
PK-93661-10-02-0C
8
© 2009 Leviton Manufacturing Co., Inc. All Rights Reserved.
display auto-inverts