Rinsing The Water Tank Before First Use - Klarstein Espressionata Gusto Manual De Instrucciones

Rinsing the Water Tank Before First Use

The appliance is supplied with a removable tank for easy cleaning.
To ensure that the first cup of Espresso will taste excellent, rinse the appliance with warm
water as following:
1 Remove the water tank from the appliance.
2 Fill it with water. The water level should be between the marks MIN and MAX in the
water tank.
3 Carefully insert the tank back into the appliance.
4 Place an empty vessel of appropriate size cup on the drip grid.
CAUTION: Make sure the steam knob is at the position 0 when you turn on
the appliance to prevent accidental scalding.
Make sure that the funnel is inserted into the funnel holder to prevent scalding
from hot liquid pouring out of the outlet.
5 Connect the power cord of the appliance to a power source.
6 Press the button to turn on the appliance. The indicator POWER will now light.
7 Press the button . The appliance will start pumping water through the outlet.
8 When the starts flowing out of the outlet, re-press the button
HINT: Note: You may hear a noise („a bubbling sound„) while rinsing the
appliance for the first time. This is normal, as the appliance releases air. After
about 20 seconds the noise will disappear.
9 The appliance now begins to heat the water.
10 When the indicator WATER lights heating has finished.
1 1 Press the button and let water run for 60 seconds or until the vessel is filled.
12 Re-press the button
13 Pour the water from the vessel into the sink.
14 Repeat the steps 9-13 until the water tank is empty.
to stop.
to stop.
EN
35