Dörr HC 2000 Manual De Instrucciones página 3

Ocultar thumbs

página de 12

/ 12
Marcadores

Idiomas disponibles

English

VII. Specifications and Parameters

Battery pack

Battery charging time

Flash charging time

Flash time

Overall dimension

Weight

VIII. Maintenance!

• If the built-in battery of the power pack requires replacement, please contact a professional service outlet to

replace it with a new special-purpose battery supplied by DÖRR.

• Damage due to unauthorized disassembling of the power pack is not covered by the warranty.

• Damage due to operations violating the instructions in this manual is not covered by the warranty.

Design and specifications subject to change without notice.

The CE marking complies with the European directives.

You can download the relative EU declaration of conformity with following link:

http://www.doerrfoto.de/info/EG-Konformitätserklärungen

www.doerrfoto.de

DÖRR Powerpack HC 2000

NiMH battery, 9.6V/2000mAH

2 hours

approx. 1 second (full power)

approx. 500 times (full power)

147x104x44.3 mm

490 g

DÖRR GmbH Fotomarketing • Postfach 1280 • 89202 Neu-Ulm/Germany

DÖRR Powerpack HC 2000

Thank you for purchasing the DÖRR Powerpack HC2000.

DÖRR Powerpack HC2000 is ideal power source for wedding and location photographers. As a professional

NiMH battery pack, DÖRR HC2000 is designed to charge Canon, Nikon, Sony, Metz and DÖRR speedlites

with external power input ports, using the relevant optional cable. .

With DÖRR HC2000 power pack, it takes only one second to charge Canon 580EX II, Nikon SB900 and Sony

F58AM flashes at full power, and provides up to 500 flashes in full brightness. This largely improvoes your

shooting efficiency and reduces working time. The power pack offers versatile compatibility, you can charge

flashes and other products of different brands simply by replacing the plug-in connector cable.

Adopting the CPU control circuit and the thermo-resistant nylon housing, DÖRR HC2000 power pack integ-

rates software protection and hardware protection, and provides super performance in the aspect of safety and

reliability.

Safety Hints

• There are high-voltage components inside the product. Due to risk of electrical shock, do not attempt to

disassemble the power pack by yourself.

• Keep out of the reach of children.

• Do not touch the metal part of the plug and the socket.

• Due to risk of fire, do not use this product under flammable conditions (such as environments containing

flammable gases or liquid chemicals).

• Make sure all plugs and sockets are reliably and firmly connected.

• This product is not water resistant; please keep it away from rain, snow or humidity and do not expose it to

temperatures exceeding 40°C.

• Please plug in or out the plug when the power pack in power off status. .

• Since this product has a much higher power output than the ordinary built-in battery of the flash, the flash

may be damaged when used at high frequency and high power. To avoid overheating of the flash, please wait

for over 10 minutes after 40 times of continuous full-power flashing.