Publicidad
Idiomas disponibles
Idiomas disponibles
17
Caroslide
When rebuilding for left side oper-
EN
ation following instructions are very
important /
Tighten the three screws for the motor
bracket to the lower plate by using nor-
mal torque. Then tighten the two motor
screws by using a light torque. Wiggle
the motor towards both sides within
the play admitted by the two screws.
Fix the motor in the middle of the play
movement. Tighten the screws by using
normal tormal.
Drive the motor to an end position.
Loosen the locking plates to provide a
position for the threaded axle that is free
from strain. Make sure trapezoid nut
is tight to the plate. Tighten the screws
alternately using normal torque. Repeat
the procedure at the other end position.
Publicidad
