Setting Up The Vmx 100; Charging The Battery In The Headset - Sennheiser VMX 100 3in1 Instrucciones De Uso

Setting up the VMX 100

Charging the battery in the headset

If you charge the battery for the first time, allow charging for at least
4 hours without interruption. Later, 2.5 hours suffice to fully charge
the battery.
To charge the battery in the headset:
Take off the headset and close the
microphone boom ³.
The headset is switched off.
Connect the USB charging cable to the
headset's socket for power supply ².
Connect the USB plug of the USB charg-
ing cable to:
• either the USB socket of the VMX 100
power supply
• or the USB socket of the VMX 100 car charger unit (only
VMX 100 3in1)
• or a USB socket of a computer.
Connect either the power supply or the
car charger unit to the appropriate
power outlet.
If the battery was completely drained,
´
the LED
of the charging process. During charging,
´
the LED lights up red. When charging
is complete, the LED
The charging process cannot be started
during an ongoing call. A fully charged
battery provides a talk time of up to five
hours or a standby time of up to 100 hours.
When the battery is about to run flat:
flashes red in the beginning
´
lights up blue.
²
³
´
9