Pairing The Headset To Mobile Phones Or Other Bluetooth Devices - Sennheiser VMX 100 3in1 Instrucciones De Uso

Pairing the headset to mobile phones or other Blue-
tooth devices
Pairing to a mobile phone
To be able to use the headset, you must first pair it to your mobile
phone or a similar device with a Bluetooth hands-free or headset
profile. Once you have paired the headset to a mobile phone, the
headset is connected automatically each time this mobile phone and
the headset detect each other.
Make sure the headset is switched on and
placed close to your mobile phone.
• If you have not yet paired the headset
to a mobile phone, the headset enters
the pairing mode automatically.
• If you have already paired the headset
to another mobile phone before, you
have to enter the pairing mode manu-
ally by
³
boom
¿
button
• The LED
´
the headset is in the pairing mode.
On your mobile phone, start a
search for Bluetooth devices (see
the manual of your mobile phone)
and follow any instruction dis-
played on your mobile phone dis-
play.
Once the headset is detected by
your mobile
"VMX 100".
When the Bluetooth connection is successfully established, the
headset is identified as "VMX 100" in the mobile phone's display.
When your mobile phone prompts a keyword, enter four zeros
(0000).
opening the
while pressing the volume
at the same time.
flashes alternatingly in red and blue to indicate that
phone,
microphone ³
select
¿
´
VMX 100
OK
Keyword
0000
11