Suzuki 990D0-23H25-CRB Instrucciones De Montaje página 4

Idiomas disponibles

NOTE: If you do not feel technical qualified to install this product on your own,

please consult with your nearest SUZUKI dealer.

Preparation

1. Park the motorcycle on a firm, flat surface where it will not fall over.

for

2. Stop the engine and remove the ignition key, wait until the engine has cooled

down

installation

3. Read these instructions carefully before installation and check that all items

are correctly packed in the kit.

4. Remove the 2 bolts that fix the radiator cover on each side use a allen key

5. Pull off the radiator covers.

Installation:

1. Align the Carbon radiator cover (1) so that the pin (position (a)) fits to the

rubber grommet on the motorbike.

Fix the 2 screws (2) at position (b) and(c) with a allen key

Repeat 1. and 2. at the other side of the motorbike

Tighten the screws (2) after adjustment of the covers with correct tightening

torque of 3 Nm

Check that all the screws are tightened before riding the motorcycle.

state of the art: 01/08

_______________________________________________ SUZUKI GENUINE ACCESSORIES

In any case, do not turn screw (position (a)) out of position.

CAUTION