Kemper SmartMaster Serie Instrucciones De Servicio página 47

EN
DANGER
Danger of electric shock!
Any work on the electrical equipment of the product must only be
performed by a qualified electrician or by operating personnel under the
direction and supervision of a qualified electrician in accordance with
electronic regulations.
Before opening the product, pull the plug, if available, and secure it
against accidental switch-on.
For faults with the product's electrical energy supply, immediately switch
the product off at the on/off switch and if available, also pull the plug.
Use only original fuses with the prescribed amperage.
Electrical components, on which inspection, maintenance and repair
work must be carried out, must be disconnected from the power supply.
Secure equipment that has been used for disconnection against
unintentional or automatic reconnection. Firstly check that no voltage is
present in activated, electrical components, then isolate adjacent
components under voltage. When making repairs, ensure that
constructive characteristics are not altered in a way that reduces safety.
Check cables regularly for damage and replace if necessary.
WARNING
Electric shock if earthing is missing!
If the protective earth connection of devices is missing or incorrectly
executed, high voltages may be present on exposed parts or housing
parts which, if touched, can lead to serious injury or death.
WARNING
Electric shock if an unsuitable power supply is connected!
The connection of an unsuitable power supply can cause parts that can
be touched to be under dangerous voltage. Contact with dangerous
voltage can lead to serious or fatal injury.
For electrical connection data, see the name plate of the product
1502764-01 - 47 -