Install And Use Wifi-Function - Rollei AC 420 Manual De Instrucciones

Matching the remote control:
Set "Remote Pair" in the menu to "On", keep pressing the two
buttons on the remote control. You can see the blue LED on the
Remote control flashing. Release the two buttons after 3 seconds.
Remote should be paired now. Press the power button on the
Camera to exit the Remote Pair and return to the preview mode.
Try to record a video or a picture with the remote control. Please
repeat the pairing if remote cannot start recording!
Install and use WiFi
1. Download the App "Rollei AC420" from the App store or from
GooglePlay;
2. Set the WiFi password in the Menu of the camera. (The default
password it 1234567890).
3. Long press Mode Button to Open WiFi function.
4. Find "Rollei AC420" in the WiFi list of smart phone and enter the
password to connect it.
5. When smart phone is connected to the camera, the camera screen
will display "Rollei AC420" and the WiFi indicator on the
camera will light.If the connection was not successful the
WiFi indicator on the camera will keep flashing.
6. Find the APP "Rollei AC420" on your smartphone. You can control
the camera via your smart phone.
7. Press Mode Button again to exit the WiFi setting.
-11-