Mobicool DC/AC Instrucciones De Uso página 9

_Mobicool.book Seite 9 Freitag, 6. Mai 2011 10:44 10
Mobicool DC/AC
NOTE For coolers with fold in handles
I
If the handle is folded back or if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded
forwards.
Place the cooler on a firm base.
Connection cable plug
DC
Coolers without the additional heating feature
Connect the corresponding cable (see figure) to the required voltage.
For the additional ABS feature: Switch the battery monitor off (OFF
position) when the cooler is running on AC supply.
The cooler starts cooling the interior.
To switch off the cooler, disconnect the plug.
Coolers with the additional heating feature
Connect the corresponding cable (see figure) to the required voltage.
For the additional ABS feature: switch the battery monitor off (OFF
position) when the cooler is running on AC supply.
Push the switch on the control panel to HOT or COLD to switch the cooler
on.
The indicators on the control panel show you the operating mode:
Operating display
Red
Green
The cooler starts cooling/heating the interior.
To switch off the cooler,
– slide the switch to the OFF position,
– disconnect the plug.
EN
AC
Operating mode
Heating
Cooling
Operation
9