Factory Reset; Common Problems - Sonoff 4CHR3 Manual Del Usuario

SONOFF TECHNOLOGIES CO., LTD.

Factory Reset

Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in
a cycle of two short and one long flash and release, then the reset is successful.
The device enters Quick Pairing Mode.
Please reset the switch to factory defaults if you want to change the Wi-Fi network,
then reconnect the new network.

Common Problems

Q: Why my device stays "Offline"?
A: The newly added device needs 1 – 2mins to connect Wi-Fi and network. If it
stays offline for a long time, please judge these problems by the blue Wi-Fi
indicator status:
1. The blue Wi-Fi indicator quickly flashes once per second, which means that the
switch failed to connect your Wi-Fi:
① Maybe you have entered a wrong Wi-Fi password.
② Maybe there's too much distance between the switch your router or the
environment causes interference, consider getting close to the router. If failed,
please add it again.
③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless
network.
④ Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile
datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quickly flashes twice per second, which means your device has
connected to Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means you access
an unsteady network, not a product problem. If the network is normal, try to turn off
the power to restart the switch.
8
English