Factory Reset - Sonoff BASICR3 Manual Del Usuario

SONOFF TECHNOLOGIES CO., LTD.

Factory Reset

Long press the pairing button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and
one long ash and release, then the reset is successful.
The device enters quick pairing mode (Touch).
Please reset the switch to factory defaults if you want to
use other Wi-Fi networks, then reconnect the network.
RF Remote Controller Pairing
The BASICRFR3 supports the remote controller with
433.92MHz frequency brand to turn on/off, and each
channel can learn it independently, which is local short
-range wireless control not Wi-Fi control.
Pairing Method:
Long press the pairing button on the switch until the red
remote-controlled LED indicator ashes once, then
press the remote control button you want to pair for
successful learning.
Clearing Method:
Long press the pairing button on the switch until the red
remote-controlled LED indicator ashes twice, then
press the learned button corresponding to the remote
controller to clear code values of all learned buttons.
7
English