Zoom 5821F Guia Del Usuario

Read Me First!
This model of the Zoom ATA is intended for use by VoIP service
providers, and by users who want to configure an ATA for their
preferred SIP service. This Read Me First! tells you how to
quickly configure the Zoom ATA for the VoIP service you
choose. Before you configure the ATA, plug the ATA into the
Ethernet port of a powered-up router then power up the ATA.
Then continue below.
Running the ATA Manager from your computer
-
Your ATA has a built-in ATA Manager that can be accessed
from your Web browser. You can use this to set and monitor
VoIP features. Some of these features can also be set by using
your telephone keypad.
-
If you will be running the ATA Manager from a Windows
computer and your router assigns dynamic addresses (most
users), please see below Installing the Zoom ATA
Manager for Windows Computers. If you will be running
the ATA Manager from a non-Windows computer and your
router assigns dynamic addresses, please see below Installing
the Zoom ATA Manager for non-Windows Computers.
- If you need to configure the ATA for a static network, please
see the instructions at the end of this flyer Configuring the
ATA for a Static Network. If you do not know what a static
network is, you most likely have a network that uses dynamic
addresses.
Installing Zoom ATA Manager for Windows
Computers
Use your browser to go to www.zoom.com/atamanager and
then follow the simple instructions to save the ATA Manager
icon to your Desktop. This takes less than a minute and puts a
Zoom icon for the ATA Manager onto your Windows desktop.
- Whenever you want to use the ATA Manager, double-click
on the Zoom icon. This brings up a Windows box that asks
for your User Name and Password. For the User Name entry,
type administrator in lowercase. (Later you can change this
by using your ATA Manager.) For the password, type
metamorph in lowercase. (Later you can also change this by
using your ATA Manager.)
User Name:
Password:
administrator
metamorph