Sicce Voyager 2 Manual De Instrucciones página 7

5) Turn the pump so that the flow is directed where desired (Pic. 4), then secure
the lateral handle tightly, so to keep the product in position.Then regulate the flow
according to your preferences turning the flow regulator in front of the pump (Pic.
5). If it is completely open, it makes a direct and strong flow for hard corals, if it is
more closed, it make a wider and softer flow for soft corals or plants.
6) Connect it to the electric socket.
MAINTENANCE
For the periodic maintenance of the pump, first of all unplug the plug from the
electric socket and then take the pump out of water.
Clean regularly the pump and the rotor. In case of very dirty or limestone or with a
lot of detritus water, it is recommended a more frequent cleaning.
Proceed in the following way: detach the pre-chamber from the pump (Pic. 2 G/F)
and take out the rotor (Pic. 2 E). Clean all the parts: the prechamber, the rotor, the
impeller and their sits.
Do not remove the dirt by hard means but using a soft brush with soap or vinegar. If,
after that, the impeller makes still some noise, substitute it with a new one because
it means that it worn out. Then assemble everything in the inverse order.
ONLINE HELP ONLINE HELP
Watch our tutorial videos on THE SICCE YOU TUBE official channel www.
youtube.com/SICCEspa.
SICCE TUTORIAL VIDEO
INSTRUCTIONS FOR THE CORRECT DISCHARGE OF THE PRODUCT
ACCORDING TO EU DIRECTIVE 2002/96/EC
When used or broken, the product does not have to be discharged with
the other waste. It can be delivered to the specific electric waste collection
centers or to dealers who give this service. Discharge separately an
electric tool avoid negative consequences for the environment and for the Health
and allows to regenerate the materials so to have a great saving of energy and
resources.
WARRANTY
This product is guaranteed against defects of materials and workmanship for a
period of 3 years from the date of purchase, except the rotor E. The warranty
certificate must be filled in by the dealer and must accompany the pump if it is
returned for repair, along with the cash register receipt or similar document. The
warranty covers the replacement of the defective parts. In case of improper use,
tampering or negligence by the buyer or user, the guarantee is void and expires
immediately. The guarantee is also void in absence of the cash register receipt or
similar document. The shipping cost to and from the factory, or the repair station,
have to be paid by the buyer.