SEH PS159 Guía De Instalación De Hardware página 12

Mounting the Print Server
The print server is a so-called slot card that is simply inserted into the provided slot.
Prepare the Printer
1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the screws from the interface cover.
4. Remove the metal cover.
Insert the Print Server
1. Insert the print server board into the slot until the board locks
2. Fasten the print server board screws.
12
Proceed as follows:
Proceed as follows:
into the receptacle.
Use KUIO 3,3 Volt Interfaces ONLY!
For more information,
please consult your retailer.
THE USE OF A 5 VOLT INTERFACE
WILL DAMAGE YOUR PRINT SERVER!
Hardware Installation Guide