Publicidad
Proceed as follows:
1. Adapt the WLAN settings of the PC to the current print server settings to
communicate with the PS54a-G. The PS54a-G ships with the following
default settings.
Mode: Ad-Hoc
SSID: SEH
Channel: 3
2. Start the InterCon-NetTool and find the PS54a-G in the print server list.
Refer to the 'InterCon-NetTool' section in the User Manual if necessary.
3. Highlight the PS54a-G in the print server list and start the Wireless Wizard
via the context menu.
4. Follow the instructions of the Wireless Wizard.
• Manually enter an IP address or select a method to automatically assign the
IP address.
• Optionally the Wireless Wizard asks for a temporary IP address.
The temporary IP address is needed for configuration purposes; it does not need to be
identical to the final IP address. The temporary IP address must be within the IP
address range of the configuration PC.
Example:
- PC IP = 192.168.100.001 / Subnetmask = 255.255.255.000
- Print server IP = 192.168.100.002 / Subnetmask = 255.255.255.000
• Select the WLAN communication mode.
- Select 'Ad-Hoc', if you want to operate the print server 'Peer to Peer'.
- Select 'Infrastructure' if you want to operate the print server within a network with an
access point.
• Enter the SSID.
- If you operate the print server in the 'Ad-Hoc' mode, enter a freely definable name.
- If you operate the print server in the 'Infrastructure' mode, enter the SSID of the
access point.
• Select a WLAN security mode and follow the instructions.
5. Verify the settings and click 'Finish' .
The settings are saved and the print server is restarted.
6. Adapt the WLAN settings of the PC to the new print server settings.
7. Choose the 'Find New' option in the 'Search' menu of the InterCon-NetTool to
find the PS54a-G.
If the PS54a-G is not listed, print a status page and verify the settings. In the event of
incorrect parameters please reset the print server and repeat the installation. Refer to the
User Manual if necessary.
8. Start the software installation of the print server on the PC.
Hardware Installation Guide
The current print server settings can be seen at
any time on the status page. To print a status
page press the status button on the print server.
19
Publicidad
