Russell Hobbs 14743-56 Instrucciones página 68

C GENERAL
19 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle.
20 When you lift the kettle, you may see moisture on the stand. Don't worry – it's the steam
used to switch off automatically, which then condenses and escapes via vents under the
kettle.
21 You may see some discolouration on the floor of the kettle. Again, don't worry – it's due to
the bonding of the element to the kettle floor.
F USING WITH INSUFFICIENT WATER
22 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
23 To reset the cut-out, remove the kettle from the stand and leave it till it goes cold before
replacing it on the stand.
C CARE AND MAINTENANCE
24 Unplug the stand, and let the kettle cool before cleaning.
25 Wipe the kettle, inside and out, with a damp cloth
26 Keep the connectors dry.
cleaning the filter
27 Open the lid.
28 Use the tab on the filter to pull the filter out of the guides, then lift it out of the kettle.
29 Rinse the filter under a running tap while brushing with a soft brush.
replace the filter
30 Slide it down, into the guides.
31 Close the lid.
C DESCALE REGULARLY
32 Descale regularly, (at least monthly). Use a descaler suitable for use in plastic products (most
products have plastic parts). Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn't be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
68