Harman JBL GTR-1001 Guia De Inicio Rapido página 3

JBL GTR-1001/GTR-601 Amplifier Quick-Connect Guide
IMPORTANT: This quick-connect guide contains information about mounting and connecting your amplifier. For complete
installation, connection, setup and adjustment information, download the full GTR-1001/ GTR-601 Amplifier User Manual at
www.jbl.com.
MOUNTING
IMPORTANT: Disconnect the vehicle's negative (–) battery
terminal before beginning the installation. Select a location that
provides enough air for the amp to cool itself.
• Do not mount the amplifier outside the car or in the engine
compartment.
GROUND & POWER CONNECTIONS
IMPORTANT: Disconnect the vehicle's negative (–) battery
terminal before beginning the installation.
Using the Connectors
• Use sandpaper to clear the paint from the metal surface at the
ground connection. Use a star-type lock washer to secure the
connection.
• Install a fuse holder for a 105A fuse (GTR-1001) or 70A fuse
(GTR-601) on the power (12V) wire within 18" (46cm) of the
(+) battery terminal. Do not install the fuse in the holder at this
time. In place of a fuse, you can install a circuit breaker of
equivalent amperage rating.
GTR-1001/601
Power
Connectors
Audio System
Head Unit
Remote Turn-On (optional)
>#18AWG (0.82mm
Fuse:
GTR-1001 = 105A
GTR-601 = 70A 18"
(46cm)
Chassis Ground
(bare metal)
2 ) Wire
>#10AWG (5.26mm ) Wire
2
>#10AWG (5.26mm 2 ) Wire
EN