Care And Cleaning - LUND 26410027 Instrucciones De Instalación

Installation Steps
Attach Rock Rail to brackets 3002-A and 3002-B
through body hole in pinch weld using M8 bolt,
lock washer, and flat washer.
12
Inspection After Installation
• Inspect all bolts and nuts for proper tightness.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
You have purchased one of the many quality Lund
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
®
branded products offered by Lund International, Inc. We take the utmost pride in
800-241-7219 • Visit us at lundinternational.com
© 2014 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Check boards for final position and tighten all hardware to
13
Lund International
Page 4 of 4
18-20 lb-ft.