Mountain Buggy The Range Manual De Instrucciones página 10

Removing Seat and Sunhood
Seat removal
1. Unfasten seat
domes from frame
along side tubes (4
domes each side).
2. Unfasten straps
underneath seat
and those attached
to frame (1 strap
each side).
3. Unfasten the domes
which fasten the
sunhood and seat
together.
To refi t seat:
follow removal instructions in reverse. Ensure
fabric is domed OVER frame.
sunhood
support wire
plastic joint
Sunhood removal
1. Pull support wire out of sunhood joint by
pushing against frame and pulling wire
downwards. Note: this operation is child
proof and therefore requires a degree of
force.
2. Repeat on opposite side.
3. Unfasten sunhood domes that attach the
sunhood to stroller frame and to stroller seat
back.
To refi t sunhood:
follow removal
instructions in
reverse.
NB:
For Terrain models
only, push seat
forward then slide
fabric up seat
support wire and
remove hammock
wire from stroller
frame.