Style selections 36BV90194-PW07 Manual Del Usuario página 6

VANITY INSTALLATION INSTRUCTIONS
4. Once the desired location is chosen, temporarily
move vanity (A) to the side -- with the assistance of
another person -- and clean mounting area. Find
and mark the locations of wall studs at mounting
site, then replace vanity (A) in desired location.
Using proper hardware (not included), drill holes
through the vanity (A) at marked locations and
secure vanity (A) to wall stud with at least one
fastener, such as a wood screw or toggle bolt.
If possible, secure vanity (A) to 2 wall studs for
increased stability.
5. To install the backsplash (C), apply adhesive
(not included) to the unpolished back side and
bottom of the backsplash (C). Position backsplash
(C) as shown on top (B) and against the wall.
Clean any excess adhesive before allowing
to dry. Install the faucet and drain set (not included)
according to the manufacturer's directions.
4
5
C
A
6
A
B