Change The Oil; Maintenance Of The Spark Plug - Zipper Maschinen ZI-STE2000IV Manual De Instrucciones

maintaining time by stages (1)
machine oil
air filter
spark plug
clearance of
air-door
fuel tank and
filter
fuel route
1. If used in dirty places, the generator should be maintained more regularly.
2. If the user does not have the right tool, or has too little knowledge, maintenance should be
performed by a qualified person.

12.1.1 Change the oil

Please discharge the machine oil quickly and
thoroughly when the engine is still hot.
1. Loosen the screw, and dismantle the repair
cover. (Fig. Y)
2. Dismantle the fuel-filling lid.
3. Discharge the dirty oil thoroughly into a
container.
4. Fill the recommended machine oil, and check the machine oil level.
5. Re-install the repair cover and screw the screw.

12.1.2 Maintenance of the spark plug

Recommended spark plug: A7RC or NGK R7HSA
To ensure the engine to work in good order, the clearance of the spark plug must be correct, and
has no accumulated charcoal.
1. Dismantle the repair cover of the spark
plug (Fig. Z).
2. Dismantle the cap of the spark plug.
3. Clean out the filth around the base of the
spark plug.
4. Dismantle the spark plug with a spanner.
ZIPPER MASCHINEN GmbH
ZI-STE2000IV
Item
check
change
check
clean
clean-
adjustment
change
check-
adjustment
clean
check
www.Zipper-Maschinen.at
every three
months or
usage at a
50 hours
time
О
О
О(1)
every 2 years Please change if necessary
Before you discharge the oil, make
sure the switches on the ventilating
pole of the fuel-burning lid and the
engine are on the "close" position.
The spark plug must be fixed
firmly, or else it will become
very hot and damage the
generator.
Do not use the spark plug whose
thermal measurement range is not
suitable.
MAINTENANCE
every six
every year
months or
or 200 hours
100 hours
О
О
О
О(2)
О(2)
A T T E N T I O N
A T T E N T I O N
40