Core Cub Cadet CCB410 Manual De Instrucciones página 15

STOPPING INSTRUCTIONS
1. Release the throttle control (1) and
wait for all moving parts to come to
a complete stop (Fig. 4).
USING THE POWER CONTROL
BUTTON
The power control button (1) allows the
operator to switch between Boost (2)
and Eco (3) modes, as needed (Fig. 5):
• Boost mode provides maximum
power for tough jobs.
• Eco mode conserves energy for
maximum run time. Eco mode is
appropriate for most jobs.
Push the power control button forward
for Boost mode (Fig. 5). Push the power
control button back to return to Eco
mode (Fig. 5).
NOTE: When blowing lighter materials
such as small leaves, set the power
control button to Eco. The lower speed
will allow the Power Cell to provide
longer running time. When blowing
heavier materials such as large leaves
or wet grass, set the power control
button to Boost. The higher speed will
produce increased air flow for moving
the heavier materials. It will also shorten
the running time of the Power Cell
before it requires recharging.
WARNING:
running the blower at high speed
will cause debris to be violently thrown.
ASSEMBLY AND OPERATING
Increased air flow when
15
1
2
3
Fig. 5