Maintenance - Core Cub Cadet CCB410 Manual De Instrucciones

CLEANING THE AIR INTAKE
It is important to provide unrestricted air
flow into the blower fan. Check the air
intake screen often to make sure it is
clean and not restricting the incoming air.
WARNING:
Cell from the blower before cleaning
debris from the bower intake screen.
1. Turn to blower up-side down (Fig. 8).
2. Carefully brush any debris off the air
intake screen (1).
NOTES:
a) Use a soft dry brush or a dry rag to
remove the debris.
b) NEVER use water or any other liquid
as you will damage the motor and/or
the screen.
c) NEVER insert a screwdriver or other
small tool into the blower screen.
You may break the screen or the
blower fan.
3. When all the debris is removed from
the screen, turn the blower right side
up and shake out any loose debris
that may have fallen through the
screen into the blower fan.

MAINTENANCE

Remove the Power
18
1
Fig. 8