Specific Safety Rules - Core Cub Cadet CCB410 Manual De Instrucciones

GENERAL POWER TOOL SAFETY WARNINGS
General Power Tool Safety
Warnings – Service
Have your power tool or charger
serviced by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool or charger is maintained.
WARNING:
your Power Lok™ leaf
blower accessory. Do not
plug in the charger or
install the Power Cell into the tool
until you have read and understand
this Instruction Manual. Learn the
tool's applications and limitations, as
well as the general and specific
potential hazards related to this tool.
Following these instructions will reduce
the risk of electric shock, fire or serious
injury.
WARNING:
wear appropriate eye
protection. Any power tool
can throw foreign objects into
your eyes and cause permanent eye
damage. ALWAYS wear appropriate
safety goggles or properly fitted safety
glasses that comply with OSHA
standards and the most recent version
of ANSI Z87.1 or CAN/CSA – Z94.3
safety standards [or other applicable
national standard]. Ordinary vision or
sun glasses generally do not provide
adequate impact or side shield / wrap
around penetration protection. Ordinary

SPECIFIC SAFETY RULES

Know
Always
glasses ARE NOT safety glasses. To
reduce the risk of injury to your face
CORE™ Outdoor Power recommends
that you also wear a face shield or face
screen over your safety goggles or
safety glasses.
WARNING:
face shields not in compliance
with ANSI Z87.1 or CAN/CSA – Z94.3
could cause serious injury if they
break upon impact.
operate when barefoot, or
wearing open toed shoes, or
sandals. Always, wear sturdy protective
shoes or boots with non-slip soles when
operating the leaf blower. Steel-toed
safety boots are recommended.
heavy-duty, non-slip gloves
and to improve your grip and
control when handling the blower.
WARNING:
durable and snug-fitting, yet allow
for freedom of movement.
7
Glasses, goggles or
WARNING:
Prevent
foot injuries! Never
WARNING:
Protect
your hands by wearing
Clothing must be