Epson Ni-MH Manual Del Usuario página 5

Use the type of power source indicated on the label, and
always supply power directly from a standard domestic
electrical outlet.
Do not place multiple loads on the electrical outlet.
Be sure your AC power cord meets the relevant local safety
standards.
Never insert or disconnect the power plug with wet hands.
Power-supply cords should be protected from abrasion, cuts,
crimping and kinking. Be sure to place your cords to avoid
any damage. Do not place objects on top of the power cord
or allow the power cord to be stepped on or run over. You
should take special care to try to keep the power cord straight
at the ends and the points where it enters and leaves the
transformer.
Do not allow the AC power cord to become damaged or
frayed.
Unplug your equipment from the wall outlet and refer
servicing to qualified personnel under the following
conditions:
If the power cord or plug is damaged; if liquid has entered
your equipment; if your equipment has been exposed to rain
or water; if your equipment has been dropped or damaged;
if your equipment is operating abnormally or exhibits a
distinct change in performance. Adjust only those controls
described in your product documentation.
Never attempt to repair this product yourself. Improper
repair work can be dangerous.
Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners.
Keep the charger terminals clean by wiping them with a dry
cloth. Be sure to disconnect the battery charger from the
power outlet before cleaning.
Keep out of reach of children.
3