Daily Function Check - Ortovox d3 Instrucciones De Uso

Checking
the earphone function:
The d3 is equipped with
an earphone connection
for a trouble-free group
searching.
Insert the earphone plug
into the earphone socket
(2) and switch the d3 to
receive mode. Now you
can hear the signal of
the transmitter that is
being searched in the
earphone, the search
direction arrows indicate
the search direction,
and the distance to the
transmitter is shown in
the display. The integra-
ted loudspeaker (3) is
switched off when the
earphone is plugged in.
All manuals and user guides at all-guides.com

DAILY FUNCTION CHECK

BEFORE STARTING A TOUR!
Check the receivers:
• All group members set their avalanche
transceivers to RECEIVE MODE.
• One member (preferably the group leader) sets
their avalanche transceiver to TRANSMIT MODE.
• If all avalanche transceivers receive acoustic and
visual signals, the receivers are working correctly.
Checking the transmitters:
• After checking the RECEIVERS, group members
must test the function of their TRANSMITTERS.
• The group members set their avalanche trans-
ceivers to TRANSMIT MODE and pass by the
group leader's receiver ONE BY ONE at a dis-
tance of about 15 m. When the group leader
receives acoustic and visual signals from every
single group member's avalanche transceiver,
the transmission function is OK.
If you notice any deviations from the functions de-
scribed, please send your device directly to the
ORTOVOX service centre for repair (see page 104).
ENGLISH
31