Before You Start - GE DCVH480EK Manual Del Propietário

REVERSING THE DOOR SWING (if desired)

BEFORE YOU START

Unplug the dryer from its electrical outlet.
REMOVE THE DOOR ASSEMBLY
1
Remove hinge bracket anchoring screws.
Slide door and hinge assembly upward; then
remove the assembly from the dryer front panel.
Installation Instructions
26
DISASSEMBLE THE DOOR ASSEMBLY
2
Remove 16 door screws and male end of latch
from the inner side of the door.
Remove the inner face.
Lift and rotate the window assembly 180º and
replace. Also rotate the inner face 180° and
replace.