Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Integral wall washbasin
knee
Ref. 061406
Contents
- Sheathing for integral wall washbasin.
080608 - Design model wastepaper bin for integral washbasin.
060606 - Detachabkle Breastplate to fi t into integral washbasin.
080418 - 1 box dispenser of gloves, tissue or towels.
460219 - Stainless steel 800 ml. soap dosing device.
461004 - Turning tap 160x180x1 (50mm nut).
461202 - H-H 1/2" (400mm) fl exible hose with stainless steel mesh.
460404 - 1/2" M-M timer button.
461604 - 1/2" M-H-M non-return mixer.
461802 - 1/2" M-H 90° knee.
454202 - 2 ½" Valve with trough for 500mm sink.
421240 - 60x5mm Hook.
409822 - Plastic nylon Fisher 6x30mm peg.
409824 - Plastic nylon Fisher 8x40mm peg.
421038 - Plate thread bolt 22x4,8mm. DIN 7981 A2.
421040 - Plate thread bolt 32x3,9mm. DIN 7981 A2.
Assembly
Check the contents.
Avoid dirt in pipes and in the area before assembly.
If the plumbing is new, let the water fl ow.
When assembling, it is advisable to use special gloves not to get cuts on hands.
Use teffl on to seal connexions.
Connect the knee to the push-button output (see arrow benetah the push-button) ·
Fig.1
Connect the outlet of the non-returning mixer to the inlet of the push button (see
arrow at the bottom of pùsh button) ·
Fig. 1
Connect the mixed water hose to the knee ·
Introduce the pipe in the upper orifi ce and fi x it the attached bolts ·
Connect the water ports (not supplied) to the non-return mixer.
Introduce the push button in the orifi ce from the inside of the case and fi x it with its
bolt from the outside.
English
FRICOSMOS
Fig. 1
Fig. 2
Connect the free end of the mixed water fl ex hose to the output.
Assemble the discharge valve ·
Fig. 3
Fix the washbasin on the wall ·
Fig. 4
You can now connect the water input and the discharge to the washbasin.
Adjust the desired temperature by turning the non-return mixing crown.
Insert the Breastplate from the top of the pan fl ap, slide it along the guides and fasten
it with screws on the previously fi tted wall plugs.
Clamp the complements to the wall on the Breastplate with its corresponding screws.
Clamp the wastepaper bin onto the wall on the desired spot and height with its wall
plugs and hooks ·
Fig. 4
Use
To open the water keep the button pressed with the knee or thigh.
To stop the water release the button.
Temperature can be adjusted with the non-return mixer handle.
Maintenance
•
Use only water and neutral soap when cleaning.
•
Wipe with a soft cloth.
•
Rinse with plenty of water.
•
Dry with a soft cloth.
•
Do not use acids or strong detergents and do not rub with a scourer or spatula.
Safety
No risks have been reported.
Available spares
080608 - Design model wastepaper bin for integral washbasin.
060606 - Detachabkle Breastplate to fi t into integral washbasin.
080418 - 1 box dispenser of gloves, tissue or towels.
460219 - Stainless steel 800 ml. soap dosing device.
461004 - Turning tap 160x180x1 (50mm nut).
461202 - H-H 1/2" (400mm) fl exible hose with stainless steel mesh.
460404 - 1/2" M-M timer button.
461604 - 1/2" M-H-M non-return mixer.
461802 - 1/2" M-H 90° knee.
454202 - 2 ½" Valve with trough for 500mm sink.
All sizes are described in mms.
English
FRICOSMOS
Publicidad
