Additional Safety Instructions - Flymo C-Li 20VB Manual Del Usuario

can result in kickback of material through the intake
opening.
• If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply before
cleaning debris.
• Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
• Keep the power source clean of debris and other
accumulations to prevent damage to the power source
or possible fi re.
• Do not transport this machine while the power source is
running.
• Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a
complete stop
• whenever you leave the machine,
• before clearing blockages or unclogging chute,
• before checking, cleaning or working on the machine.
• Do not tilt the machine while the power source is
running.
Maintenance and storage
• When the machine is stopped for servicing, inspection,
or storage, or to change an accessory, shut off the
power source, disconnect the machine from the supply
and make sure that all moving parts are come to a
complete stop. Allow the machine to cool before making
any inspections, adjustments, etc. Maintain the machine
with care and keep it clean.
• Store the machine in a dry place out of the reach of
children.
• Always allow the machine to cool before storing. d)
When servicing the shredding means be aware that,
even though the power source is switched off due to the
interlock feature of the guard, the shredding means can
still be moved.
• Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
• Never attempt to override the interlocked feature of the
guard.
Additional safety instructions for units with bagging
attachments
Switch-off the machine before attaching or removing the
bag.
Recommendation
The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
ADDITIONAL BLOWER SAFETY WARNINGS
• To reduce the risk of electric shock – Do not use
on wet surfaces. Do not expose to rain. Store
indoors.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer's recommended attachments.
• If power tool is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to a service center.
• Do not handle the power tool with wet hands.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce air fl ow.
• Keep hair, loose clothing, fi ngers, and all parts of
body away from openings and moving parts.
• Use extra care when cleaning on stairs.
ADDITIONAL SAFETY INSTRUCTIONS FOR
OPERATION
• Make sure the product is fully assembled before you
use it.
• The product can cause objects to eject, which can
cause damage to the eyes. Always use an approved eye
protection when you operate the product.
• Be careful, a child can come near the product without
your knowledge during operation.
• Do not operate the product if there are persons in the
work area. Stop the product if a person goes into the
work area.
• Make sure that you are always in control of the product.
• Do not use the product if you cannot receive aid if an
accident occurs. Always make sure others know when
you use the product before you start operation.
• Do not turn with the product before you make sure that
no persons or animals are in the safety area.
• Remove all unwanted materials from the work area
before you start.
• Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other conditions.
Dangerous conditions, such as slippery surfaces, can
occur because of bad weather.
• Make sure that you can move freely and work in a stable
position.
• Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
• Stop the motor before you move the product.
• Do not put down the product with the motor on.

ADDITIONAL SAFETY INSTRUCTIONS

• Use the product correctly. Injury or death is a possible
result of incorrect use. Only use the product for the tasks
found in this manual. Do not use the product for other
tasks.
• Obey the instructions in this manual. Obey the safety
symbols and the safety instructions. If the operator
does not obey the instructions and the symbols, injury,
damage or death is a possible result.
• Do not discard this manual. Use the instructions to
assemble, to operate and to keep your product in good
condition. Use the instructions for correct installation
of attachments and accessories. Only use approved
attachments and accessories.
• Do not use a damaged product. Obey the maintenance
schedule. Only do the maintenance work that you fi nd
an instruction about in this manual. An approved service
center must do all other maintenance work.
• This manual cannot include all situations that can
occur when you use the product. Be careful and use
your common sense. Do not operate the product or do
maintenance to the product if you are not sure about the
situation. Speak to a product expert, your dealer, service
agent or approved service center for information.
• Remove the battery pack before you assemble the
product, put the product into storage or do maintenance.
• Do not use the product if it is changed from its initial
specifi cation. Do not change a part of the product
without approval from the manufacturer. Only use parts
that are approved by the manufacturer. Injury or death is
a possible result of incorrect maintenance.
• This product makes an electromagnetic fi eld. The
electromagnetic fi eld can cause damage to medical
implants. Speak to your physician and medical implant
manufacturer before you operate the product.
• Do not let a child operate the product. Do not let a
5