Kalorik USK DRM 39135 Manual De Instrucciones página 4

Fax +1 305 430 9692
PART DESCRIPTION
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the
•
requested breaks. Failure to follow this instruction carefully may
result in damage to the motor. Limit mixing time to three minutes
to avoid overheating the motor. Allow the product to cool down
at least one minute after each three-minute mixing cycle.
To prevent the motor from overheating, let the product
•
completely cool for at least 15 minutes after five cycles of usage.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
1
2
1. Motor housing
2. Safety switch
3. Body
3
4. Mixing spindle (fixed part)
5. Cup rest
6. Stainless steel mixing cup
4
7. On/Off switch
5 8. Base
6
NOTE: As a safety feature, the
7
product will not operate unless
the Mixing Cup (6) is properly
hooked under the Safety Switch.
8
4
Assembly page 4/24
special instruction from Team
Print only
USK DRM 39135 - 120501