Care And Maintenance; Technical Specifications - Viatom Wellue B02 Manual Del Usuario

Use only the approved AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side of
the blood pressure monitor.
c) Plug the adapter into your electrical outlet. When the AC adapter is
connected, no battery current is consumed.
Note: No power is taken from the batteries while the AC adapter is
connected to the monitor. If electrical power is interrupted,
(e.g., by accidental removal of the AC adapter from the outlet) the
monitor must be reset
by removing the plug from the socket and reinserting the AC adapter
connection.

Care and Maintenance

Wash hands after each time measurement.
If one device is used by different patients, wash hands before and
after each use.
A) Do not expose the device to either extreme temperatures,
humidity, dust or direct sunlight.
B) The cuff contains a sensitive air-tight bubble. Handle this cuff
carefully and avoid all types of stress through twisting or buckling.
C) Clean the device with a soft, dry cloth. Do not use gas, thinners
or similar solvents. Spots on the cuff can be removed carefully with a
damp cloth and soapsuds. The cuff with bladder must not be washed
in a dishwasher, clothes washer, or submerged in water.
D) Handle the tube carefully. Do not pull on it. Do not allow the
tubing to kink and keep it away from sharp edges.
E) Do not drop the monitor or treat it roughly in any way. Avoid
strong vibrations.
F) Never open the monitor! This invalidates the manufacturer's
warranty.
G) Batteries and electronic instruments must be disposed of in
accordance with the locally applicable regulations, not with domestic
waste.
Sensitive measuring devices must be checked for accuracy from
time to time. We recommend a periodical inspection of your unit by
an authorized dealer every 1 year. Please turn to local distributor or
the manufacturer.
Warranty
Your blood pressure monitor is guaranteed for 1 year against
manufacturers' defects for the original purchaser only, from date of
purchase. The warranty does not apply to damage caused by
improper handling, accidents, professional use, not following the
operating instructions or alterations made to the instrument by third
parties.
Warranty only applies to the instrument. All accessories including the
cuff are guaranteed for one year, USB charging cable is not included.
There are no user serviceable parts inside. Batteries or damage from
old batteries is not covered by the warranty.
Note: According to international standards, your monitor should be
checked for accuracy every year.
Certifications
Device standard:
This device is manufactured to meet the European blood pressure
monitors:
EN1060-1 »* EN1060-3 » IEC 80601-2-30 * 1SO81060-1 » IEC60601-1-11
IEC60601-1
Electromagnetic compatibility:
Device fulfills the stipulations of the International standard
IEC60601-1-2

Technical Specifications

Wight: 256g (batteries and AC adapter is not included)
Display: 3.35"x2.28" LCD Digital Display
Size: 118 (W) x 110 (L) x 52(H) mm
Accessories: 1xMain Device, 1xCuff, 1xUsers manual
Operating Conditions: Temperature: 5°C to 40°C; Humidity: 15% to 93% RH;
Pressure altitude: 70kPa~ 106kPa
Storage And Shipping Conditions: Temperature: -25°C to 70°C;
Humidity: 10% to 93% RH; Pressure altitude: 7OkPa~ 106kPa
Measuring method: Oscillometric
Pressure sensor: Resistive
Measuring range: DIA: 40-130mmHg; SYS: 60-230mmHg