Regalo 6010 HD Manual De Instrucciones página 3

STEP 3
To install the mesh wall (A) on the bed rail, slide it
over the frame until it reaches the other end, zip it
shut, then attach the velcro strap over the zipper to
complete the installation. Repeat STEPS 1 – 3 to
assemble the second side of the double bed rail.
Mesh wall must go over entire bed rail frame.
NOTE: If the zipper does not close securely, make the necessary adjustments to ensure proper closure.
DO NOT use the bed rail without securely zipping the mesh wall properly.
STEP 6
When the frame assembly is at the end of the
guide tracks, pivot the frame assembly into an
upright position. Repeat STEPS 4 – 6 on the
other frame assembly.
NOTE: When you swing the frame assembly into
the upright position, it should automatically lock
into place. If it does not lock in easily, adjust the
bars of the bed rail and try again. Ensure that
the locking mechanism is working properly
before use.
STEP 4
GUIDE PIN
GUIDE TRACK
Lay the frame assembly (F,G) flat, and align the
left guide pins with the guide track on the left
guide arm assembly. Repeat on the right side.
Mesh wall must go over entire bed rail frame.
Mounting Your Bed Rail to the Bed
STEP 1
Remove the mattress from the bed and place the
bed rail on top of the box spring that supports the
mattress. The straps and anchors should be
extended opposite the bed rail and mounted to the
other side of the box spring. You may need to
release the strap locking buckles located on the
under side of the guide arm assemblies.
NOTE: The following step may require the help
of an additional person.
STEP 5
Slide the frame assembly along the guide track on
each side.
STEP 2
Place the mattress on top of the box spring and
bed rail assembly.
NOTE: The anchoring straps should NOT be
twisted. If twisted, the anchoring straps will not
tighten properly.
NOTE: The bed rail mesh wall must fit firmly
against the side of the mattress. This requires
you to properly tighten the anchoring straps,
which can be difficult. Please follow STEPS 3 –
4 carfeully for the safest installation.