Open Accessory; Listening On Android™ Devices - Sharp XL-HF202PH Manual De Manejo

Listening on Android™ devices
■ Introduction : Open Accessory
Open Accessory support allows external USB hardware
(an Android USB accessory) to interact with an Android-
powered device in a special accessory mode. When an
Android-powered device is in accessory mode, the con-
nected accessory acts as the USB host (powers the bus
and enumerates devices) and the Android-powered device
acts in the USB accessory role. Android USB accessories
are specifically designed to attach to Android-powered
devices and adhere to the Open Accessory Protocol, that
allows them to detect Android-powered devices that support
accessory mode.
1
Insert the connector to the device.
Device
(Smartphone/Tablet)
Connector
2
Connect the device to the main unit via USB connector.
USB connector
(not supplied)
■ Android device playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the USB button (remote control) or FUNCTION
button repeatedly (main unit) to select USB function.
3
Connect the device (Smartphone/Tablet) to the unit.
"USB Media" will be displayed.
4
Press the play button (on main unit, remote control or
device).
Notes:
● If the source device has an extra bass or equalizer
function, set them to off. If these functions are on,
sound may be distorted.
● Incoming calls will pause the playback/application.
● Once the calls are answered, the conversation can only
be heard through the built-in speaker of the cellular
device. Turn on the device speaker or disconnect the
device to start conversation.
■ To disconnect the Android device
1
Quit the application (apps).
2
Disconnect the device from the USB terminal.
■ Various functions
Function Remote control
Track
up/down
Fast
forward/
reverse
Notes:
● If non-compatible device is detected, "Dev No Support"
will be displayed.
Controls (play/pause/skip up/skip down) will function
●
based on actual Applications (Apps) controls used on
Android devices.
Android is a trademark of Google Inc.
E-9
Operation
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.