FOREVER BMS-400 Manual página 5

Turning off Turning off Turning off
Press and hold the power switch. When the power switch is released, micro- Press and hold the power switch. When the power switch is released, micro-
phone turns off and the LED on the power switch goes off . phone turns off and the LED on the power switch goes off .
Pairing built-in loudspeakers with a phone Pairing built-in loudspeakers with a phone Pairing built-in loudspeakers with a phone
1. Turn the microphone on. 1. Turn the microphone on.
2. Start the Bluetooth module in your phone. 2. Start the Bluetooth module in your phone.
3. Find a device ,,BMS-400". 3. Find a device ,,BMS-400".
4. When pairing the devices, used may be asked to enter PIN code. Standard 4. When pairing the devices, used may be asked to enter PIN code. Standard
code is ,,0000". code is ,,0000".
When connecting Audio-in cable to micro USB port, Bluetooth connection is When connecting Audio-in cable to micro USB port, Bluetooth connection is
lost. lost.
Playing music on built-in loudspeakers (Bluetooth) Playing music on built-in loudspeakers (Bluetooth) Playing music on built-in loudspeakers (Bluetooth)
1. Part the microphone with your device. 1. Part the microphone with your device.
2. Start music application on your phone. 2. Start music application on your phone.
3. Play the music. 3. Play the music.
Track change Track change Track change
Tracks may be changed using buttons „V+,|<" or „V-, >|". Tracks may be changed using buttons „V+,|<" or „V-, >|".
Volume change Volume change Volume change
Volume may be increased by pressing and holding „V+,|< „ button. Volume may Volume may be increased by pressing and holding „V+,|< „ button. Volume may
be reduced by pressing and holding „V-, >|" button. be reduced by pressing and holding „V-, >|" button.
Listening to music from microSD/via USB Listening to music from microSD/via USB Listening to music from microSD/via USB
Insert a memory card to the TF slot or a memory stick to the USB port to listen Insert a memory card to the TF slot or a memory stick to the USB port to listen
to music. The loudspeaker will automatically switch to play mode. Removing to music. The loudspeaker will automatically switch to play mode. Removing
microSD card/memory stick causes return to a previous operation mode. microSD card/memory stick causes return to a previous operation mode.
Using the microphone Using the microphone Using the microphone
After starting the device, the microphone is on by default. Voice / sound should After starting the device, the microphone is on by default. Voice / sound should
be directed directly to the top of the microphone, because sound sensor is be directed directly to the top of the microphone, because sound sensor is
directional. directional.
Using Audio-in cable Using Audio-in cable Using Audio-in cable
1. Turn the microphone on. 1. Turn the microphone on.
2. Connect the Audio-in cable to micro USB port in the microphone. 2. Connect the Audio-in cable to micro USB port in the microphone.
3. Connect the other end to a sound source (mini-jack). 3. Connect the other end to a sound source (mini-jack).
4. Play the music on a device the cable is connected to, it will be played using 4. Play the music on a device the cable is connected to, it will be played using
the loudspeakers built-in in the microphone. the loudspeakers built-in in the microphone.
When connecting Audio-in cable, Bluetooth function turns automatically off . When connecting Audio-in cable, Bluetooth function turns automatically off .
EN EN
5 5