Use The Armrest; Use The 60Cm Wheels; Carrying; Maintenance - Moretti ARDEA ONE Helios Smart CP770-40 Manual De Instrucciones

Silla de ruedas plegable con auto-empuje helios smart - asiento 40 cm / asiento 43 cm / asiento 46 cm / asiento 48 cm / asiento 50 cm, silla de ruedas plegable para tránsito helios smart go! - asiento 40 cm / asiento 43 cm / asiento 46 cm / asiento 48 cm
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10

11.4 Use the armrest

The armrest can be flip-up and detachable, flip-up, detachable and height adjustable, flip-up, deta-
chable, height adjustable and sliding.
Flip-up armrest: press the front release lever and turn it towards the back.
Detach the armrest: press the front release lever, the rear button and pull upwards.
Adjust the armrest in height: press the button on the outside of the armrest and raise or lower the
armrest as needed. Release the button once the desired position is found.
Adjust the armrest in depth: press the button on the outside of the cover soft armrest and slide the
armrest forward or back as needed. Release the button once the desired position is found.

11.5 Use the 60cm wheels

The rear 60cm wheels are used when self-propelled.
Grasp the handrail and wheel through the desired direction.

11.6 Carrying

The wheelchair has been designed to be easily carried. Once the armrest and the footrest are
removed, can be closed and easily positioned in the car boot, for example. If this can't be pos-
sible, position the wheelchair in front of the car rear seat so that it is stable and cannot slip or
slide. Lock the wheelchair with the seatbelt.

12. MAINTENANCE

The ARDEA ONE devices by Moretti are checked carefully and supplied with EC mark, once
launched on the market. For patient and physician's safety we recommend to let check the de-
vice by the manufacturer or by laboratory authorized every 2 years. In case of repair use only
original spare parts. Before using follow the
Moretti ARDEA ONE wheelchairs require few elementary and periodic maintenance, below we
list the checks to be carried out periodically:
• WEEKLY:

frame and metallic parts.

• MONTHLY:
braking capacity.
• AS NEEDED:
seat cleaning.

13. CLEANING AND DISINFECTION

13.1 Cover and padding

The cover and padding are in Nylon. Clean with warm water and mild soap.
13.2 Frame and metallic parts
Clean with warm water and mild soap. Dry with a soft cloth in order to not scratch the painting.

13.3 Brakes and wheels

Clean the wheels with warm water and mild soap. Pay attention in drying the wheels, it's dan-
gerous use the wheelchair with wet wheels.

13.4 Disinfection

if you need to disinfect the device use a common disinfectant cleaner.
WARNING!
Do not use solvent and abrasive product.
"BEFORE USE"
chapter.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido