Elastic Adjustable Backrest (Cp790-Xx); Adjust The Footplate (Cp780-Xx, Cp785-Xx, Cp787-Xx, Cp790-Xx); Adjust The Height Of Rear Wheels (Cp780-Xx, Cp785-Xx, Cp790-Xx); Adjust The Front Wheels (Cp780-Xx, Cp785-Xx, Cp790-Xx) - Moretti ARDEA ONE Helios Smart CP770-40 Manual De Instrucciones

8.6 Elastic adjustable backrest (CP790-xx)

The backrest for model CP790-xx is elastic and adjustable to facilitate the containment of the
trunk. To adjust the tension of the backrest:
• Remove the cushion from the backrest;
• Loosen the Velcro straps;
• Position the patient to allow more winding trunk;
• Close bands;
• Reposition the cushion back.

8.7 Adjust the footplate (CP780-xx, CP785-xx, CP787-xx, CP790-xx)

8.8 Adjust the height of rear wheels (CP780-xx, CP785-xx, CP790-xx)

(FIG.8) Image for illustrative purposes only

8.9 Adjust the front wheels (CP780-xx, CP785-xx, CP790-xx)

To adjust the angle of the footplate:
• Loosen the screw located on the outside of footplate
• Adjust the angle of the footplate;
• Tighten the screw.
(FIG.7) Image for illustrative purposes only
To adjust the height of the rear wheels:
• Remove the wheels through the quick release;
• Loosen the screws of the wheels adapter
• Place the wheels adapter at the desired height;
• Tighten the screws and the nut;
• Reposition the wheels.
WARNING!
The adjustment of the wheelchair must be performed
by qualified personnel to assess its suitability
and correct configuration
To change the height of the front wheels:
• Loosen the screw which locks the wheel to the fork
• Remove the wheels and the screw;
• Choose the desired hole;
• Insert the wheels and tighten the screw and the nut.
(FIG.9) Image for illustrative purposes only
7
(FIG. 7)
(FIG. 8)
(FIG. 9);