Silva ADC SUMMIT Manual De Instrucciones página 52

14.6.0 Altimeter Mode -
hold
[mode]
ALTITUDE m
144
734 80
hold
[mode]
Altitmeter Mode
Altimeter Mode Setting Sequence
Altitude Mode Setting
[mode]
Altitude Altitude
Alarm Calibration
Setting Display
Altimeter Mode Setting
!
The following functions can be performed in
the Altimeter Setting Mode.
1) Altitude Alarm Settings,
a) ON or OFF
b) Target Altitude Level for alarm
2) Altitude Calibration
To Select the Setting Display
!
To select the setting display, press and hold
the [mode] button for about 2 seconds
(altitude digits will start flashing).
!
In the setting display, press the [mode]
button to select between the Altitude Alarm
Setting and Altitude Calibration Display.
!
Check the 'Altitude Alarm Setting' and
'Altitude Calibration' sections below for
more detail on the above settings.