Silva ADC SUMMIT Manual De Instrucciones página 64

15.6.2 Data Log Mode -
B
RXXX -0001
06 MAR 2003
2:10.30
88.2% 28.0 8 C
Data Log Display
(Data 1)
[set]/[reset]
Data Selection Sequence
[mode]
C
wind speed
R001 -0001
06 MAR 2003
logging
date &
2:10.30
time
88.2% 28.0 8 C
temperature
Date & Time
[mode]
record
no.
R001 -0001
1001.3 hPa
2:10.30
barometric
88.2% 28.0 8 C
pressure
Barometric Pressure
To Review the Logged Data
[set]/[reset]
data
001
no.
[set]/
the next
Logged
[reset]
Data
[set]/
[reset]
the last
Logged
Data
R001 -0001
21.3 Km/H
[mode]
2:10.30
88.2% 28.0 8 C
Wind Speed
[mode]
data no.
altitude
R001 -0001
144 m
[mode]
2:10.30
88.2% 28.0 8 C
relative
humidity
Altitude
To Review the Logged Data
!
Following the previous 'To Select the
Logged Record' section to select the target
record.
Once a record is selected:
!
Press the [reset] button to scroll forward to
select the target data among the logged
data (from data 1 to the last data) following
the adjacent diagram.
!
Or press the [set] button to scroll backward
to select the target data among the logged
data (from last data to data) following the
adjacent diagram.
!
If a data is selected, the record number and
data number appear on the 1st row of the
display. The logging date and time (the time
such data was logged) appear on the 2nd
and 3rd row of the display. The temperature
and relative humidity
of the display.
!
To review the other information of the
selected data, press the [mode] button
following the adjacent diagram.
speed, temperature, barometric pressure,
and the altitude at the current location will
appear one by one.
appear on the 4th row
The wind