Technical Specification - SOUNDMASTER SCD2120 Manual De Instrucciones

Repeat Mode
Repeat 1: Press the REP button once, the repeat LED indicator will light and flash continuously.
This single track will be repeated.
Repeat All: Press the REP button twice, the repeat LED indicator will stay lighted. The whole disc
will be played continuously.
To Cancel Repeat Function: Press the REP button until the lighted repeat LED indicator turned
off.
CD resume function
RESUME – continuing from where you have stopped
1. Set the FUNCTION switch to CD position and set the RESUME switch to ON position
2. To start playing the CD, press the
3. Press STOP
4. Press to resume playback.
5. Playback continues from where you have stopped.
To deactivate RESUME, set the RESUME to OFF position.
Note:
The RESUME function is still activated when the FUNCTION switch is set off.
Opening the CD lip during playback, RESUME function is also activated.
Important Note
Automatic standby switching
To comply with the ERP2 directive, the unit automatically switches to standby after approximately
10 minutes without a signal. To switch the unit on again, press the
If the button is pressed continuously for 5 seconds, the unit switches to standby mode. To
switch the unit on again, press the
Power supply
Battery supply
FM range
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
in once whenever you want to stop playback.
button on the unit.

TECHNICAL SPECIFICATION

: 230V~50/60Hz
4x 1.5V "C" size / UM-2
: DC6V
: 87.5 – 108MHz
button.
www.soundmaster.de
3
SCD2120 / English Instruction Manual
button on the unit.