Descargar Imprimir esta página

König Electronic P.SUP.NBT125K1 Manual De Uso página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
POWER UP YOUR NOTEBOOK
1.
You can connect your notebook (or any other appliance that works within the offered output voltages and
output power range) to this adapter by connecting one of the supplied detachable power tips.
2.
Determine the proper power tip. The polarity of the small connectors is pre-set with positive tip polarity.
Common symbol is shown as follows:
3.
Set the DC voltage selector at the desired voltage position. (ie. 12V at 6.5A, 14/15/16/18/18.5/19/19.5/20V
at 6A or 21/22V at 5A) before you connect it to your notebook computer. You may find the required
voltage setting on your original AC adaptor or in the computer user's manual (PLEASE NOTE THAT AN
INCORRECT VOLTAGE SETTING CAN DAMAGE YOUR COMPUTER. IF YOU ARE UNSURE ABOUT
THE REQUIRED VOLTAGE DO NOT CONNECT IT TO THIS ADAPTER BUT CONSULT YOUR LOCAL
DEALER!).
4.
Make sure the total connected load does not exceed the rated output current of the power adaptor.
5.
Connect the power cord to the power supply first and then insert the AC plug into your wall socket. The
LED indicator will light instantly.
6.
Switch on your computer.
7.
Please note: The LED indicator will come on and stay on only when set to any voltage.
POWER UP YOUR USB DEVICE
1.
You can connect your USB devices with this power supply by connecting the USB output (female) port.
2.
The DC output from the USB port is 5V at 0.5A regulated. You may find the required output current in the
USB devices' user manual.
3.
Make sure the total connected load does not exceed the rated output current of the power adaptor.
4.
Connect the power cord to the power supply first and then insert the AC plug into your wall socket.
5.
Switch on your USB devices.
CAUTION
1.
Do not short-circuit the output terminals.
2.
Ensure the correct voltage is used as continuous excess voltage could damage your notebook.
3.
For DC plug output: Do not try to use this power supply with appliance requiring more than 6.5A for 12V,
6A for 14/15/16/18/18.5/19/19.5/20V or 5A for 21/22V (120 Watts max.)
For USB output: Do not try to use this power supply with appliances requiring more than 0.5A for 5V.
4.
Do not attempt to open this unit.
5.
Remove from mains when not in use.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
ENGLISH
POSITIVE TIP
POLARITY
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
2

Publicidad

loading