monzana Deuba DHN001-1 Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6
case graduations. Example : 56 Nm
1. Turn knurled handle until the zero graduation on the bevel adge of the knurled
handle is lined up with the vertical mark on the case and is even with the 50Nm.
graduation.
2. Turn knurled handle clockwise until 6 Nm. graduation on the bevel edge of the
handle is in line with the vertical line on the case.
3. Lock handle securely by turning lock nut clockwise, and now wrench is set at
56Nm. which is ready to use. See figure 1 and 2.
c) Install the proper socket or attachment to the square drive and apply to nut or
boll and pull handle until you feel and/or hear wrench click. Release pull and wrench
automatically resets for next operation.
DO NOT CONTINUE TO PULL AFTER WRENCH RELEASES. USE SPECIAL CARE AT LOW
TORQUE SETTINGS THAT WILL PULL STOPS WHEN WRENCH CLICKS.
CAUTION:
• If wrench has not been used or has been in storage for some time, operate it
several times at a low torque setting which permits special internal lubriacant to re-
coat internal working parts.
When wrech is not in use, keep doing adjustment at lowest torque setting
Drehmomentstufe.
Do not turn handle below lowest torque setting.
Do not continue pulling on the wrench after pre-set torque has been reached and the
wrench has been released. Pressure must be taken off the handle and the wrench
allowed to automatically reset itself, continuing to apply pressure after the wrech
has been released, will result in damage to the part being torqued by applying more
than the specified amount of torque.
Clean wrech by wiping, Do not immerse in any type of cleaner which may affect
special high pressure lube with which the wrech is packed at the factory.
This torque wrench was calibrated and tested before leaving the factory and is
accurate +-4%. THIS IS A PRECISION MEASURING INSTRUMENT
Perform a regular conformity check, after the 5000 use and/or maximum duration
of 12 months! This must be done by an expert. In the event of non-compliance, the
functioning or Accuracy no longer guaranteed!
www.DeubaXXL.de

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

105065

Tabla de contenido