Connections; Terminals And Connectors; Standard Connections - Acoustics Concept 500 Manual Del Proprietário

Connections

Terminals and Connectors

The Concept 500s are bi-wireable. A bi-wireable crossover has four terminals. The upper pair of terminals connect
to the treble (HF) speaker and the lower pair to the bass (LF) speaker. The crossovers are pre-fitted with removable
links to connect the terminal pairs and configure the loudspeaker in single–wire mode. This allows you to connect the
loudspeaker conventionally using one pair of cables.

Standard Connections

Connect the RED (+) terminal of the RIGHT loudspeaker to the RED, Positive (+) terminal on the RIGHT channel of
the amplifier.
Connect the BLACK (-) terminal of the loudspeaker to the matching BLACK, Negative (-) terminal of the amplifier.
Repeat this procedure for the LEFT channel.
9